Presses
Label Line
Label Line focuses on narrower web flexo work for pressure-sensitive labels, shrink sleeves, wrap-around bands and short repeat jobs. It speaks to converters running frequent substrate changes, fine register tolerances and finishing steps such as lamination, varnish, die cutting and slitting.
Narrow-web label production
Label Line suits converters producing label work on flexo equipment. Press paths for narrower formats, repeat jobs, and tighter control need to match label substrates and finishing.
Begin with the stock you run most often, whether that is self-adhesive paper, PP, PE, PET or linerless material. Print repeat, web width, anilox choice, drying method and the type of embellishment all change which label press route makes sense. Work planned for Johannesburg, Durban or Cape Town can also differ because humidity, dust and freight handling affect label substrates and finished reels.
Check the unwind, web guiding and tension settings before the first metres go through the press. Label work punishes poor prep because small artwork, barcodes and die positions show faults quickly. A simple start-up sheet kept near the machine helps operators record sleeve, plate, anilox and curing settings for the next repeat order.
What the label page covers
Press paths for repeatable label output need tighter control and narrower formats. The machine type, substrate range and finishing requirements need to be set out in one clear brief. For label converters, the important detail is often not top speed but how steadily the press holds register, colour and tension across the run.
Use Label Line alongside related web and finishing information before expanding into wider packaging formats. If a press is moving through Durban Port, match the reel width, electrical requirements and accessory list to the receiving site before unloading. When using the contact form, include the current label application, substrate and finishing steps so the enquiry is tied to the right press path.
- Narrow-web route for label substrates
- Start-up checks for register and tension
- Application details sent to the team
South African label press conditions
Many local plants handle labels in tighter spaces than carton or film lines, so reel movement, waste removal and finishing layout matter early. Export work moving through OR Tambo or coastal distribution hubs may need extra attention on packaging method, storage and reel protection. Older factories can also limit access for unwind stands, chill units or UV systems, which changes the press plan.
Coastal moisture can influence adhesive behaviour, stock storage and the frequency of cleaning around print stations. Inland dust tends to collect on sensors, edge guides and web paths, especially where doors remain open near converting areas. During power interruptions, operators often shift plate mounting, ink preparation and approval timing to protect material and reduce waste on restart.
Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.
Details to send for Label Line
Send the label size, substrate type, colours, finish and any die-cut or lamination requirement. Add photos of the current press and note recurring faults such as register drift, curling, tunnelling or inconsistent release.
Include site power details, available air supply and the space around unwind, print and finishing sections. Keep records of sleeves, plates, anilox rolls and curing units together so procurement and production are working from the same machine information.
What our Flexo Printing customers say
Verified Google reviews